With the XL, Sollas is introducing a sustainable alternative in particular for shrinkwrappers and stretchbanders. You safe about 2 to 5 times the electricity consumption for the whole line. The XL has a total consumption of not more than 5 kW where normally a shrinktunnel alone already consumes 8 to 25 kW.
| Size range (in mm) | minimum | maximum |
|---|---|---|
| Length (L) | 125 | 450 |
| Width (W) | 100 | 350 |
| Height (H) | 30 | 250 |
| Maximum output | 50 /min depending on film length |
|
| Max. film width | 750 mm | |
| Max. film length | 1250 mm | |
| Max. film roll diameter | 500 mm | |
| Control system | Siemens | |
| Air system | Festo | |
| Power consumption | 5kW (without accessories) | |
| Machine Colour | RAL 9006 | |
Key Benefits
- 50 to 80% reduction of power consumption
- No waste of lm
- Use of PP, PE and coated paper
- Possibility for easy opening feature
- Possibility for printed lm for on pack promotion
- Banding and overwrapping
- Limited number of size parts
Sustainable
Next to the reduction in power consumption, due to eliminating the shrinktunnel, you will also reduce the consumption of power to cool your production facility.
Moreover, the Sollas XL machine produces no lm waste. Traditional L-sealers use an excessive amount of lm in combination with a shrinktunnel. So compared to an automatic L-sealer with shrinktunnel you will not only reduce the power consumption but also eliminate lm waste.
So if sustainability is an important topic for you and your company and you want to be prepared for a greener future, then consider the Sollas XL! For all machines a whole range of accessories is available like print mark registration for handling printed lm, a lm slitter, etc.
